Wall to Wall Cable Displays (Chrome)

Description

The premium quality cable displays are wall mounted and include a 3m steel cable. It is perfect for wall displays and window displays in retail shops, agencies, restaurants, salons, reception areas, galleries and more! The cables are suspended from wall to wall and are fully adjustable and are designed to suspend acrylic pockets, panels, artwork canvases (using adjustable hooks) and more! Due to its efficiency and quickness, it is widely used for advertising as it even creates a stylish and smart interior. The efficient design means you can display your pictures on both sides of the pocket (back and front). Cable tensioners can also be purchased for cable lengths over 2m so that cables being suspended are kept stiff and fixed. 

Steel Cable Length: 3m            Thickness: 1.5mm 

Fixture Material: Brass              Fixture Colour: Polished Chrome

How to use (without cable tensioner): The wall fitting pieces need to be separated into two parts (base and stems). Screw one part of the pieces (base) into the wall at both the top and bottom of the display. By lining up the holes of the top and bottom pieces, reattach the other part of the pieces (stems). Insert the cable through the hole at the top (stem) and tighten the screw. Then insert the cable through the bottom hole (stem) and tighten the screw. You can remove any excess cable by cutting it off. Repeat these steps for the second cable, keeping enough distance for your cables.

How to use (with cable tensioner): The wall fitting pieces need to be separated into two parts (base and stems). Screw one part of the pieces (base) into the wall at both the top and bottom of the display. By lining up the holes of the top and bottom pieces, reattach the other part of the pieces (stems). Insert the longer cable with ½ the tensioner through the hole at the top (stem) and tighten the screw. Then insert the shorter cable through the bottom hole (stem) and tighten the screw. On the longer cable, move the top tension piece up so the stopper can be seen. Loosen the screw and once the ideal length for tight suspension is settled, then tighten and fix the stopper in that position. Once properly positioned, you can remove any excess cable by cutting it off. The tensioner pieces can be screwed and reattached again. Repeat these steps for the second cable, keeping enough distance for your cables.