Ceiling to Floor Rods LED Pocket Kit (A0)

Description

• The premium-quality LED pocket kit includes a ceiling-to-floor rod system, fittings, and a power adaptor.
• It’s perfect for window displays and can be used at reception desks, shops, agencies, restaurants, salons, and more.
• The efficient design means you can display your pictures on both sides of the pocket (back and front), portrait, or landscape.
• It is quick to use and your displays can be added and removed from the pocket holders effortlessly without any tools and is ideal to advertise and showcase your displays even in the dark.
• On the 6mm suspended rods, the pocket holders are mounted from the ceiling to the floor.
• When installing, the rods allow you to adjust the height and position of the pocket holders and it enables the power to go through so your displays can be lit up.
• Inside the pocket holders you get the low voltage LED lighting which is a very bright, white light.
• The design of the lighting means you get a very bright and neat light that does not glare, giving you a lovely and stylish display that is easy on the eye.

Pocket Holder Size:           A0 (1189 x 841 mm)

Pocket Holder Material: Acrylic

Rod Length:                           1.5m (can be cut to required length during installation or joined together)

How to install: Inside the shell, there are screw mounts (brass) which need to be separated into ceiling and floor fittings. Screw one brass mount to the ceiling, then attach the ceiling shell again to the rod. By lining up the position using the suspended rod, the second brass mount is then screwed to the floor. The rod is then inserted into an electric wire connector, then the floor mounted shell and then into the tension spring. Once the rod stopper has been fixed, you can remove any excess rod by cutting it off or you can join two rods together. The floor fitting shell can be attached again to the brass mount. Rod tension is kept due to the springs. Repeat these steps for the second rod, keeping enough distance for your LED pockets. 

Ceiling to Floor Rods LED Pocket Kit Includes: 

• 1 x A0 LED pocket holders (portrait or landscape) 
• LED lighting driver & power adaptor
• 5m electric-wire & UK compatible 3 pin plug
• 4 x Ceiling to Floor Rods (1.5m length) (6mm thickness)
• 4 (per panel) x Pocket holder rod supports 

Fittings come in a polished chrome finish. 

4 pocket cable supports are required for one LED pocket (2 for each rod on left & right) 

By using 2 rods together, you can get 3m length rods as each rod has two ends (male/female).

How to install LED driver & power adaptor:

Ensure for your safety that all power is turned off before any installations!

There are 3 wires on the LED driver & power adapter, 2 x wires with naked-ends, and 1 x wire (5m) with a 3 pin plug. One naked-end wire is attached to the electric wire connector situated at the bottom of the rod being suspended. To fix the wire into place, tighten the screw. Attach the other naked-end wire to the electric wire connector on the other cable. Tighten the screw on this connector to fix the wire into place. Into the power socket, plug the adaptor in and you can now showcase your LED light displays!