Wall to Wall Cable Displays (Black & White)

Description

The wall to wall cable displays come with a 3m steel cable and a cable tensioner and are perfect for window displays or wall displays on retail floors, reception areas, salons, restaurants, travel/estate agencies and art galleries! The cables are adjustable and are suspended from wall to wall. Ideal for displaying panels, acrylic poster pockets, unframed canvases and mount boards (using adjustable cable hooks). Due to the efficient and easy design, it is very popular and widely used for advertising; the cables can be suspended above and underneath a window to create stylish window displays. With acrylic pockets, posters can be displayed on both the front and back!  Cable tensioners can also be purchased for cable lengths over 2m so that cables being suspended are kept stiff and fixed no matter the temperature.

Material: Brass

Colour: Black or White

Steel Cable Length: 3m

Cable Thickness: 1.5mm

How to install Wall to wall cable displays (without cable-tensioner):

The wall fitting pieces need to be separated into two parts (base and stems). Screw the pieces (base) into the wall at both the top and bottom of the display. By lining up the holes of the top and bottom pieces, reattach the other part of the pieces (stems). Insert the cable through the hole at the top (stem) and tighten the screw. Then insert the cable through the bottom hole (stem) and tighten the screw. You can remove any excess cable by cutting it off. Repeat these steps for the second cable, keeping enough distance for your cables.

How to install Wall to wall cable displays (with cable-tensioner):

The wall fitting pieces and the cable tensioner need to be separated into two parts (base and stems). Screw one part of the pieces (base) into the wall at both the top and bottom of the display. By lining up the holes of the top and bottom pieces, reattach the other part of the pieces (stems). Insert the longer cable with ½ the tensioner through the hole at the top (stem) and tighten the screw. Then insert the shorter cable through the bottom hole (stem) and tighten the screw. On the longer cable, move the top tension piece up so the stopper can be seen. Loosen the screw and once the ideal length for tight suspension is settled, then tighten and fix the stopper in that position. Once properly positioned, you can remove any excess cable by cutting it off. The tensioner pieces can be screwed and reattached again. Repeat these steps for the second cable, keeping enough distance for your cables.